Power Solutions

Manufacturer Part Number: POESETv2 The complete Passive Poe over Ethernet - SET contains two pieces INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet - SET is...

Manufacturer Part Number: POE-SPLT-S The POE-SPLT-S accepts PoE power on the RJ45 jack and splits the DC Power to a DC connector and data to the RJ45 Plug. Useful for devices that are powered via a DC power jack.Key FeaturesShielded CAT5e cable and...

Manufacturer Part Number: PoE SPLITTER PoE splitter is a passive outdoor device which provides PoE passthrough functionality for video surveillance and repeater setup scenarios. Besides powering up two devices on the same tower it also has an integrated...

Manufacturer Part Number: VOR-OB5 Veracity VOR-OB5 OUTBREAK PoE Splitter with 5VDC, 12.5W jack. Simply connect OUTBREAK in line with the IP camera's network connection, and wire its DC output to the camera's power input. The camera can then connect to...

Manufacturer Part Number: VOR-OB12 Vearcity VOR-OB12 Outbreak PoE Splitter gives 12-14 watts power via 12V DC jack. Simply connect OUTBREAK in line with the IP camera's network connection, and wire its DC output to the camera's power input. The camera...

Manufacturer Part Number: 17-103 Teletronics 17-103 Ethernet Power Extractor for POE devices. Ethernet Port Pin Layout for Voltage Polarity: Pin 4 and 5 (+) voltage; Pin 7 and 8 (-) voltage.Key FeaturesTVs protection: 1500 WattsDC Power Jack size...

Manufacturer Part Number: 17-104 Teletronics 17-104 Ethernet Power Extractor for NON POE devices. Ethernet Port Pin Layout for Voltage Polarity: Pin 4 and 5 (+) voltage, Pin 7 and 8 (-) voltage.Key FeaturesTVs protection: 1500 WattDC Power Jack size...

This item is DISCONTINUED/ END-OF-LIFE (EOL). Manufacturer Part Number: PD-AS-601/5 PowerDsine's active splitters enable data terminals that were not originally designed to accept power from the Ethernet, to be powered by standard Power over Ethernet...

This item is DISCONTINUED/ END-OF-LIFE (EOL). It has been replaced with PD-AS-951/12-24 (please contact us if this recommended replacement is not quite what you need). Manufacturer Part Number: PD-AS-601/12 PowerDsine's active splitters enable data...

Manufacturer Part Number: POE-SPLT-4824AC The POE-SPLT-4824AC-GBT Active splitters POE adapters which convert a DC PoE input voltage to regulated 24VAC output. The output is provided on a wire terminal connector which accepts up to 12AWG wire.Requires a...

Manufacturer Part Number: POE-SPLT-4812G Tycon POE-SPLT-4812G active splitters are POE adapters which convert an 802.3at PoE Input to 5VDC 25W output The output is provided on a standard 5.5mm/2.1mm barrel connector on a 14? cable.Ethernet speeds of...

Manufacturer Part Number: POE-MSPLT-4809 The POE-MSPLT line of dynamic splitters are compact Power over Ethernet adapters which splits the Data and PoE power onto separate output connectors and converts the active PoE (IEEE802.3af/at) input into a...