Power Solutions

Manufacturer Part Number: FP283A-1-120-NNN Streetlight power tap adapters work with any luminaire that utilizes a photocontrol and locking type receptacle. They install between the photocontrol or shorting cap and the receptacle to provide constant AC...

Manufacturer Part Number: PHTCELTAP Streetlight power tap adapters work with any luminaire that utilizes a photocontrol and locking type receptacle. They install between the photocontrol or shorting cap and the receptacle to provide constant AC power to...

Manufacturer Part Number: FP283A-7865 Streetlight power tap adapters work with any luminaire that utilizes a photocontrol and locking type receptacle. They install between the photocontrol or shorting cap and the receptacle to provide constant AC power...

Manufacturer Part Number: IoT Connect and safely control power from an Arduino, Raspberry Pi, Galileo or other micro-controller. The universal input connects to any circuit including 3.3V and 5 volt logic. No driver is required. Simply connect two wires...

Manufacturer Part Number: VPL24-210 230/115V, 50/60Hz, 24/12V, 5VA for Thermostat Interface.It comes with the split bobbin construction to reduces interwinding capacitance and eliminate the need for electrostatic shielding. Dual winding construction...

Manufacturer Part Number: LPC9 The LPC9, WPS PRO is reliable remote control and web power switch that eliminates overloads, brown-outs, blown breakers and other power problems before they occur. It allows you to start devices in sequence automatically...

Manufacturer Part Number: 5771-25-1 This streetlight photocell power tap adapter draws constant 120V AC power from streetlight luminaire or lighting pole. This version includes a 7-pin ANSI C136.41 receptacle for dimming control pass-through (allows the...

Manufacturer Part Number: 5731-10-2 This streetlight photocell power tap adapter draws constant 120V AC power from streetlight luminaire or lighting pole. For use with wireless equipment, surveillance cameras, traffic monitoring, and other communication...

Manufacturer Part Number: POE-MSPLT-4805 POE-MSPLT-4805 is a 10/100Mb splitter used to power a non POE device using POE. It has an 802.3af/at or 48VDC Passive PoE input. The 12W DC output is via a standard 5.5mm/2.5mm barrel connector on a 6in cable...

Manufacturer Part Number: 5731-20-1 This streetlight photocell power tap adapter draws constant 120V AC power from streetlight luminaire or lighting pole. For use with wireless equipment, surveillance cameras, traffic monitoring, and other communication...

Manufacturer Part Number: APOE02-WM POE injector that required to power the OMxP series access points via Ethernet. It combines power from the OM2P power supply with Ethernet from your LAN and outputs a combined power and Ethernet signal.Compatible 12,...

Manufacturer Part Number: 5730-10-2 This streetlight photocell power tap adapter draws constant 120V AC power from streetlight luminaires and delivers the same to your ancillary devices. The power tap is designed to operate from dusk to dawn, powering...