Remote Battery Monitor for Solar, UPS, and SCADA Systems

(No reviews yet) Write a Review
SKU:
BTRM-200
MPN:
BTRM-200
Shipping:
Calculated at Checkout
$597.89
Frequently bought together:

Description

The BTRM200 is designed to monitor battery capacity transparently to system operation and provide netwrok based notification should a battery fail or its capacity drop below a specified threshold level.

Critical power back-up systems must be ready when they are called upon. Most vital systems are designed to operate for 8, 12, 24 or more hours when commercial power fails. The BTRM (Battery Testing Remote Monitor) from Ventev® monitors critical battery systems in real time, 24/7 and will pro-actively communicate via Ethernet over any wireless network if the batteries will still perform as designed. The BTRM combines field-proven, industry standard load testing with the latest in Ethernet communications supporting multiple communications protocols including SNMP and DNP3. In addition, a user friendly web based interface enables easy plug and play operation. If a vehicle had no fuel gauge, how long can it go before it runs out of gas? The BTRM from Ventev® is like a fuel gauge for your batteries providing you real time, critical Battery Health Information that can be acted upon before there is a problem.

Designed remote UPS and remote solar/pv systems such as for Oil & Gas or Utility SCADA systems e.g. wireless remote monitoring of well heads; Smart Grid; AMI/AMR; Security & Surveillance.

Key Features

  • Continuously assess the actual Battery Voltage independent of the charger voltage (float voltage) which is a more reliable method for battery testing
  • Each device is IP addressable and remotely configurable with a web-based GUI
  • User selectable Low Voltage Disconnect On/Off
  • System Alarms: battery that falls below minimum capacity threshold or that has low battery voltage will cause the BTRM200 to issue a message to the network monitoring system and/or activate one of the units alarm contacts.
  • Includes 2 dry contacts for basic RTU functionality. Example config includes:
    • Door alarm
    • AC power off
    • DC power on

 

Technical Specifications

Electrical
DC Input Voltage Range 9-32 V
AC Input Voltage Range 90-130 V
Communication Interface RJ45 and DB9
Comm. Protocols Supported Ethernet, SNMP and DNP3
Total Inputs 6 (1 AC voltage input; 2 DC current inputs; 3 DC voltage inputs)
Mechanical
Test Equipment Connector Type FC
Battery Included No
Dry contact sensors 2
Temparature sensor Yes
Environmental temperature -20° C to +60° C
Humidity 5 % to 95% Non Condensing
Mounting DIN rail mounting
Weight 5oz
Dimension 4 x 6 x 1 (in)

 

Quick Links

Datasheet

User Guide

User Manual

Reference Setup Drawings

Discuss in the Forums (user community input)

Knowlege Base & Support

Ask a Question

View AllClose