Power Over Ethernet (POE)

This item is DISCONTINUED/ END-OF-LIFE (EOL). It has been replaced with PD-AS-951/12-24 (please contact us if this recommended replacement is not quite what you need). Manufacturer Part Number: PD-AS-701/24 PowerDsine?s PD-AS-701 High-Power active...

This item is DISCONTINUED/ END-OF-LIFE (EOL). It has been replaced with PD-AS-951-12-24 (MPN: PD-AS-951/12-24) (please contact us if this recommended replacement is not quite what you need). Manufacturer Part Number: PD-AS-701/12 PowerDsine?s...

The Laird Technologies POE Passive Splitter is applicable for a wide range of network products such as access points, routers, IP cameras, modems, switches, embedded computers, and other network devices.

Manufacturer Part Number: POE-48i5s-AFI The POE adapter system is available in 5V @ 2.4A precision regulated outputs. The units are rated for operation at -10 to +60 deg C and up to 90% humidity, so they perform reliably in outdoor weatherproof...

Manufacturer Part Number: POE-5S-AFI Power Over Ethernet Active Splitter with Isolation 802.3af , Output 5VDC at 2.4A 12W. The active POE Splitter gives IEEE 802.3af compatibility, accepting any POE power from IEEE 802.3af router or power supply. The...

Manufacturer Part Number: POE-9S-AFI Power Over Ethernet Active Splitter with Isolation 802.3af , Output 9VDC at 0.75A 12W. The active POE Splitter gives IEEE 802.3af compatibility, accepting any POE power from IEEE 802.3af router or power supply. The...

This item is DISCONTINUED/ END-OF-LIFE (EOL). Manufacturer Part Number: POE-24S-AFI Power Over Ethernet Active Splitter with Isolation 802.3af , Output 24VDC at 0.5A 12W. The active POE Splitter gives IEEE 802.3af compatibility, accepting any POE power...

Manufacturer Part Number: POESETv2 The complete Passive Poe over Ethernet - SET contains two pieces INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet - SET is...

Manufacturer Part Number: POE-SPLT-S The POE-SPLT-S accepts PoE power on the RJ45 jack and splits the DC Power to a DC connector and data to the RJ45 Plug. Useful for devices that are powered via a DC power jack.Key FeaturesShielded CAT5e cable and...

Manufacturer Part Number: PoE SPLITTER PoE splitter is a passive outdoor device which provides PoE passthrough functionality for video surveillance and repeater setup scenarios. Besides powering up two devices on the same tower it also has an integrated...

Manufacturer Part Number: VOR-OB5 Veracity VOR-OB5 OUTBREAK PoE Splitter with 5VDC, 12.5W jack. Simply connect OUTBREAK in line with the IP camera's network connection, and wire its DC output to the camera's power input. The camera can then connect to...

Manufacturer Part Number: VOR-OB12 Vearcity VOR-OB12 Outbreak PoE Splitter gives 12-14 watts power via 12V DC jack. Simply connect OUTBREAK in line with the IP camera's network connection, and wire its DC output to the camera's power input. The camera...