Antenna Towers & Masts

These roof pads are use as a buffer between the roof and non-penetrating roof mounts on top of buildings. 1/2" x 18" x 48" Rubber Mat

Manufacturer Part Number: FRMPAD This 3/8" thick pad provides a protective barrier between non-penetrating roof-mounts (mounts that sit on the roof and are not drilled into the roof) and the roof, further protecting the roof.Key Features3/8" thick...

Manufacturer Part Number: FRM125HC+FRMMAT Rohn R-FRM125 5-ft mast allows no penetration of roof surface. Galvanized for corrosion protection. 1-1/4" diameter.Key FeaturesNo penetration of roof surfaceGalvanized for corrosion protectionIncludes FRMMAT...

This item is DISCONTINUED/ END-OF-LIFE (EOL). It has been replaced with MT-F1637 (please contact us if this recommended replacement is not quite what you need). Manufacturer Part Number: FRMMAT Roof pads for FRM series mounts such as 5ft...

Manufacturer Part Number: JPIPE Antenna J-Pipe with 90 degree swivel mount and 1.5" diameter allows convenient mounting on roofs and walls. Galvanized steel and powder coated paint allows for in-building and outdoor installation. Use to mount customer...

Manufacturer Part Number: FRM125HC ROHN non-penetrating roof mount for wireless cable, DBS or TV antennas. The mast is 1.25"OD and 60" tall. Designed for concrete block ballast 36" square.Key FeaturesNo penetration of roof surface and galvanized for...

Manufacturer Part Number: FRM225HC The FRM is non-penetrating roof mount offering 60" mast size ranging1-1/4" to2-3/8" OD (Outside Diameter) Key Features No penetration on roof surface and Galvanized for corrosion protection Designed for concrete block...

Non-Penetrating Roof Frame is ballast secured using up to 20 cinder blocks (not included). The smooth underside ensures damage free contact with the rooftop. Six rubber mats (included) protect the roof top surface. Hot dipped galvanized. Includes U-bolts...

Manufacturer Part Number: WS-NPRF10-RC_6RMAT Non-Penetrating Roof Frame is ballast secured using up to 20 cinder blocks (not included). The smooth underside ensures damage free contact with the rooftop. Six rubber mats (included) protect the roof top...

U-Bolt kit includes 2 stainless steel U-Bolts, 4 Flange Nuts and 2 saddle clamps for mounting the universal antenna J-Pipe Mounts (regular and XL) to a pole up to 2" diameter. Note the regular J-Pipe or long J-Pipe and the Pole are not included.

Manufacturer Part Number: MT-F1637 COMMSCOPE's MT-F1637 1/2 in x 18 in x 48 in rubber mat, protects roof surfaces and can be used as a walking pad when required to comply with building codes. Specifications Tower/Mast...

Manufacturer Part Number: RFWJPOMT15L1P5D Antenna J-Pipe with 90 degree swivel mount and 1.5" diameter allows convenient mounting on roofs and walls. Galvanized steel and powder coated paint allows for in-building and outdoor installation.Use to mount...