9dBi Multi Band Omni-Directional Cellular/ LTE Antenna
Digital Antenna PowerMax multi-band cellular antennas offer extended range to cell phones in the U.S and for International frequency bands. Versatile and easy to install, Digital Antenna PowerMax cellular antennas can be easily mounted on a wall or pole. Ideal for buildings and applications with long cable runs.
- Powerful brass radiators
- Soldered connections
- Power directing ferrite choke bead
- High gloss urethane finish
- 316 stainless steel ferrule
- 9dB gain
|This multi-band antenna is similar to the 288-PW but supports additional European/Asian 900MHz, 1800MHz and U.S AWS band and European/Asian 1700/2100MHz bands.|
Can also be connected to standard marine 1.25" male (external threaded) mount using F114 - Female to Female 1"x14 Ferrule.
Made for use with all cellular systems, including third generation (3G) and WCDMA technology including CDMA, TDMA, PCS, GSM, DCS, UMTS, HSDPA, HSUPA, HSPA, WCDMA & AMPS. Compatible with all analog, digital, dual band and tri-mode phones.
For maximum cellular range of up to 50+ miles, use with Digital Antenna cellular amplifiers such as the PowerMax North American (DA4000) or Euro/Asian (DA4000E).
All Digital Antenna antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
|Frequency Band||824-896MHz: Cellular (North America) |
890-960MHz: GSM (Europe/Asia)
1710-1755MHz: UMTS Uplink (North America)
1710-1880MHz: DCS (Europe/Asia)
1850-1990MHz: PCS (North America)
1885-2025MHz: UMTS Uplink (Europe/Asia)
2110-2155MHz: UMTS Downlink (North America)
2110-2200MHz: UMTS Downlink (Europe/Asia)
|Max Input Power||200 watts|
|Dimensions||18" l x 1” OD|
|Exterior Finish||White, UV stable poly-urethane coating|
|Ferrule||316 Stainless Steel|
|RF Connector||Type N female|
|Wind Rating||135 mph|
|Installation||Supplied L- bracket for pole/wall. To mount the 295-PW to a 1.25" threaded male mount such as the marine mount, use the F114 double female ferrule.|
Cables Not Included:
The antenna includes no cable. For a short run of 20' you can use our 20' RG-58 coax extension which has the appropriate connections for the Yagi. Please note that our other RG-58 cables can not be directly connected to the Yagi antenna.
For longer runs, we suggest using one of the below lengths of Ultra Low Loss LMR-400 Cable. This cable is fairly stiff so if you plan on connecting the Yagi directly to your phone with an antenna adapter we suggest you also include an 5' RG-58 extension. The below cables may also be connected together using the N-Female to N-Female barrel connector.
The primary difference between RG-58 and LMR-400 is the dB signal loss. RG-58 loses approximately 12dB/100' while 9913 loses about 4dB/100' (which is a big difference).
- 20' LMR-400 Extension Cable (N/Male Connectors)
- 30' LMR-400 Extension Cable (N/Male Connectors)
- 50' LMR-400 Extension Cable (N/Male Connectors)
- 75' LMR-400 Extension Cable (N/Male Connectors)
- 100' LMR-400 Extension Cable (N/Male Connectors)
An antenna pigtail cable is required to connect this antenna to your phone or datacard.
Antennas that have been damaged, marred, etc are not returnable. See our return policy for more information.