400 Watt 24 Volt Wind Turbine

The TPW Series Wind Turbines from Tycon Power Systems are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast anodized aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are available in 12V and 24V versions.

The blade diameter of the 200W is 0.920 meter while the 400W is 1.12 meter. The 6 blade design offers better performance in light winds and reduced vibration when spinning at speed.

The TPW series wind turbines have automatic overspeed protection to prevent damage in high winds.

The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output.

Mounting is to the top of a 41mm (1.6") ID standard pole. The hardware used is stainless steel for corrosion protection.

Includes a battery charging controller to prevent battery over-charge and over-discharge. Controller can be used in conjunction with a solar controller to create a hybrid power system.

Features:

• Wind Turbine startup wind speed of 2.1m/s (4.5mph)
• Smooth and quiet running maintenance free sealed turbine
• Sealed die cast aluminum housing for protection from harsh environments
• Very light and compact
• Easy Installation and Maintenance Free Operation
• Electronic over-speed protection
• Charges batteries from flat

Technical Specifications
Enclosure Type	TPW-200-12	TPW-200-24	TPW-400N-12	TPW-400N-24
Startup Wind Speed	2.1 m/s (4.5 mph)	2.1 m/s (4.5 mph)	2.1 m/s (4.5 mph)	2.1 m/s (4.5 mph)
Power Rating	150W (at 12.5 m/s)	150W (at 12.5 m/s)	250W (at 12.5 m/s)	250W (at 12.5 m/s)
Max Output Power	200W	200W	400W	400W
Output Voltage	12V	24V	12V	24V
Rotor Dia	0.92 m (3ft)	0.92 m (3ft)	1.12 m (3.7ft)	1.12 m (3.7ft)
Weight	8.5kg (19lb)	8.5kg (19lb)	10.5kg (23lb)	10.5kg (23lb)
Monthly Energy Prod	17kWh @ 5.4 m/s (12mph)	17kWh @ 5.4 m/s (12mph)	60kWh @ 5.4 m/s (12mph)	60kWh @ 5.4 m/s (12mph)
Construction	Glass reinforced nylon blade; anodized die cast aluminum body; IP65 and salt mist corrosion protectoin.
Survival Wind Speed	35 m/s (78mph)
Mounting Pole Required	41 mm (1.614 in) Inner Diameter Pole
Certifications	CE, RoHS
Protection	Electronic over-speed protection, open circuit, short circuit

 

Quick Links

TPW-Series Data Sheet

Example setup drawings

Discuss in the Forums (user community input)

Contact us to Discuss your Project

Contact an Rfwel Wireless Support Specialist for integration assistance or if you cannot find a suitable pre-packaged wind turbing system for your power needs.