Power Over Ethernet (POE)

Manufacturer Part Number: POE-MSPLT-4805 POE-MSPLT-4805 is a 10/100Mb splitter used to power a non POE device using POE. It has an 802.3af/at or 48VDC Passive PoE input. The 12W DC output is via a standard 5.5mm/2.5mm barrel connector on a 6in cable...

Manufacturer Part Number: APOE02-WM POE injector that required to power the OMxP series access points via Ethernet. It combines power from the OM2P power supply with Ethernet from your LAN and outputs a combined power and Ethernet signal.Compatible 12,...

POE Wall Mount Accessory

Manufacturer Part Number: APOE08G Alfa Network APOE08 Passive POE Injector with 8 output ports providing power to your remote network equipment. Power output is dependent on the power input and care should be taken to ensure compatibility with connected...

This item is DISCONTINUED/ END-OF-LIFE (EOL). Manufacturer Part Number: PD-AS-701/18 PowerDsine?s PD-AS-701 High-Power active splitters enable data terminals that were not originally designed to accept power from the Ethernet, to be powered by HiPoE...

Manufacturer Part Number: PD-9001GR/AC The Generating up to 30W, the 9001GR enables remote power for a new range of applications including 802.11n Access Points, pan-tilt-zoom (PTZ) cameras and video-phones. It complies with the IEEE 802.3at PoE...

Manufacturer Part Number: AF24-POE Ubiquiti POE-50-60W power supply giving POE 50v, 1.2A with US cord (IEC-320 C6). Provides Earth Grounding, Surge and ESD protection.Key Features4 pair powering (Pins 1, 2, 4, 5 (+) and Pins 3, 6, 7, 8 (-)Difference and...

Manufacturer Part Number: N000900L001D Cambium N000900L001D PoE power supply has an AC input and a Data Input which then drives a 30V power plus data( PoE) output to the radio. Meets stringent Level VI efficiency requirements and carries regulatory...

Manufacturer Part Number: PS18V+APOE02-WM The PS18V is a low cost auto ranging switching wall plug 14W power supply that outputs 18VDC at 0.8A. Input 120/240VAC 50/60hz. The APOE02-WM is POE injector that is required to power the OMxP series access...

Manufacturer Part Number: RBGPOE-CON-HP Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V). You can...

Manufacturer Part Number: PD-AFAT-TESTER Check your RJ-45 outlet for power using the PoE AF/AT Tester. The Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE802.3af or...

Manufacturer Part Number: POE-DC-AF The converter is used to power 802.3af compatible devices like LigPTP PRO and UNITY from 12-24 DC voltage power sources. This product is ideal solution in solar, wind power systems and outdoor telecommunication...