Power Solutions

This item is DISCONTINUED/ END-OF-LIFE (EOL). It has been replaced with TP-POE-24 (please contact us if this recommended replacement is not quite what you need). Manufacturer Part Number: TP-POE-24-WP Tycon TP-POE-24-WP Power Over Ethernet Power...

Manufacturer Part Number: TP-POE-24iR-CI The TP-POE are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the output. They have various protections for surge, short circuit, overload and...

Manufacturer Part Number: POE-SPLT-2424AC POE-SPLT-2424AC is a unique device that converts a 24VDC passive PoE input into a regulated 24VAC 40W output. The output is provided on a standard 5.5mm/2.1mm barrel connector on a 14in cable. The 10/100Mb...

Manufacturer Part Number: LPX090 90V replacement gas tube for AL series coaxial lightning protectors. Technical Specifications Gas Tube Breakdown Voltage 90 V ? 20% Gas Tube Impulse Breakdown Voltage 1000 V ? 20% Gas Tube Insulation...

Manufacturer Part Number: ICT2412-40A ICT switching voltage converter receiving 20-30 VDC input, 12 VDC output. 36.0 A continuous, 40.0 A maximum, Used for negative polarity ground systems.Key FeaturesInputs 24VDC and Outputs 12VDC VoltageDesigned for...

Manufacturer Part Number: IS-50NX-C2-MA POLYPHASER's IS-50NX-C2-MA 125 ? 1000 MHz general coverage flange mount. Max surge 50 kA. 600 VDC turns on N Female on equipment port N Male on antenna port.Key FeaturesBroad frequency ranges from 125 MHz to 1000...

Manufacturer Part Number: SEC-PSPP Modular Connector Cable for use with SEC Series Power Supplies. DC terminals have been provided with a set screw, do not connect bare stranded wire end directly to the DC output terminal as the strands will spread out...

Manufacturer Part Number: NP-0801DUE NP-0801DUE offers protected remote power monitoring and controls for each of its eight outlets. It constantly monitors power conditions and usages at the inlet thereby giving true RMS AC current and voltage, phase...

Manufacturer Part Number: POE-SPLT-4824G-P The POE-SPLT-4824G-P Active splitters is a unique, Gigabit speed, Power over Ethernet adapters which convert an 802.3af/at PoE input to an 802.3af/at PoE output plus a 24V DC output on a wire terminal connector...

Manufacturer Part Number: DDC4818 DDC4818 works in environments which allow -48VDC/ +48VDC to be stepped step down to 18VDC output for compatible devices. When you have to use a higher-voltage POE in a long cable-run, use this step-down adapter to...

Manufacturer Part Number: R8W31A The HPE Aruba R8W31A is a 15.4W PoE Injector that is suitable to use for Instant On AP22 Indoor Access Points. Power cable to be purchased separately. Key Specifications Device Type POE...

Manufacturer Part Number: VAD-CHGR POINTSOURCE Charger with 2.1mm jack, centre positive connector to be plugged on the battery module. For use with the Veracity VAD-PS-BM Battery Module.Key FeaturesAvailable with changeable UK, US, EU, AU plugs ...