Power Over Ethernet (POE)

Manufacturer Part Number: APOE08 Alfa Network APOE08 Passive POE Injector with 8 output ports providing power to your remote network equipment. Power output is dependent on the power input and care should be taken to ensure compatibility with connected...

Manufacturer Part Number: POE-SPLT-2424AC-G This is an active splitter PoE adapter which converts 24V DC PoE to regulated 24VAC output. The output is provided via 5.5/ 2.1mm DC barrel connector and is isolated from the input. Requires a 4pair PoE input...

Manufacturer Part Number: 100-00080 The Mimosa Gigabit PoE 50V passive PoE is compact easy to install without the need for power strips and extension cords while reducing the chances of accidental power disconnects caused by consumers tapping into power...

Manufacturer Part Number: POE-INJ-1000-WTx Shielded Gigabit POE injector and splitter. It provides an output voltage of between 5-58VDC dependent on input via a POE ethernet port. The input voltage is provided through a removable wire terminal type power...

Manufacturer Part Number: POE-INJ-1000-WT Shielded Gigabit POE injector and splitter. It provides an output voltage of between 5-58VDC dependent on input via a POE ethernet port. The input voltage is provided through a removable wire terminal type power...

This item is DISCONTINUED/ END-OF-LIFE (EOL). Manufacturer Part Number: TP-POE-1824 The TP-POE-1824 is a unique Power Over Ethernet adapter which converts an 802.3af/at 48VDC POE input into a 18V or 24VDC regulated passive POE output. The POE output...

Manufacturer Part Number: PD-3501G/AC Microsemi's PD-3501G Power over Ethernet (PoE) single port Midspan (PoE injector) offers a compact and cost effective, fully IEEE 802.3af compliant solution for IP phones, WLAN access points, network cameras and...

Manufacturer Part Number: POE-18i The POE-48i is an advanced power supply / power inserter with auto-ranging input and a regulated output voltage ideal for equipment compliant with the IEEE 802.3af POE standards. This power supply includes an LED...

Manufacturer Part Number: POE-HP-24i Laird POE-HP-24i is an advanced 802.3af compliant power supply/inserter. The power supply is autoranging on the input and has a regulated voltage output and it has overload and short circuit protection. It will...

Manufacturer Part Number: POE-INJ-LED-S TYCON POE-INJ-LED-S POE Injector with power on and current indicator LED's. The Power LED shows that DC power (12V to 24V) is being supplied to the inserter through the DC jack. The current LED shows that a POE...

Manufacturer Part Number: RBGPOE MikroTik RBGPOE Gigabit PoE injector for powering any RouterBOARD over Gigabit Ethernet by connecting your power source and then using an ethernet cable to connect the injector to the RouterBOARD device.Key FeaturesFor...

This item is DISCONTINUED/ END-OF-LIFE (EOL). Manufacturer Part Number: TP-DCDC-1248DX2-HP High power PoE injectors with Dual 802.3af/at compatible outputs. This means that two devices can be powered from a single PoE injector. The data path...