Power Over Ethernet (POE)

Manufacturer Part Number: POE-INJ-LED-S TYCON POE-INJ-LED-S POE Injector with power on and current indicator LED's. The Power LED shows that DC power (12V to 24V) is being supplied to the inserter through the DC jack. The current LED shows that a POE...

Manufacturer Part Number: RBGPOE MikroTik RBGPOE Gigabit PoE injector for powering any RouterBOARD over Gigabit Ethernet by connecting your power source and then using an ethernet cable to connect the injector to the RouterBOARD device.Key FeaturesFor...

This item is DISCONTINUED/ END-OF-LIFE (EOL). Manufacturer Part Number: TP-DCDC-1248DX2-HP High power PoE injectors with Dual 802.3af/at compatible outputs. This means that two devices can be powered from a single PoE injector. The data path...

Manufacturer Part Number: POE-MPPTP LigoWave POE-MPPTP Gigabit PoE Power Supply giving 802.3at, 48VDC Out from 110-240VAC. Designed for LigoPTP Pro and Unity.Key FeaturesAC input 110/220VDC output 48V/0.5AData rate 10/100/1000MbpsPOE Standard IEEE 802...

Manufacturer Part Number: TP-POE-HP-56G-FBN The TP-POE-HP-56G-FBN is an autoranging device so it accepts AC inputs from 90VAC to 264VAC (50/60 Hz) and supply 5% regulated 56V DC voltage at 60W on the output. There are also various protections for surge,...

Manufacturer Part Number: TP-POE-48-WP The TP-POE-xx-WP Power Over Ethernet Power Sources are a low cost Passive POE inserter/injector compatible with a wide variety of passive POE powered devices. They are midspan devices, which means there is a...

Manufacturer Part Number: TP-POE-HP-24G The TP-POE-HP-24G High PoE Power Source offered by Tycon Power Systems is a quality power injector providing years of reliable operation even in the toughest conditions. It accepts Gigabit data-in on a shielded...

Manufacturer Part Number: TP-SW8NC-OUT24 The TP-SWxxNC-OUT series of outdoor POE switch are designed for operation in harsh outdoor environments. The switch can be powered via a wire terminal connector or over POE into the uplink port. This allows the...

Manufacturer Part Number: POE12PORT An injector is required to power the OM2P series via Ethernet, and this rack mounted injector will power 12 access points with the included power supply (US Plug). It combines power from the power supply with Ethernet...

Manufacturer Part Number: TP-SW5GNC-OUT24 The TP-SWxxNC-OUT series of outdoor POE switch are designed for operation in harsh outdoor environments. The switch can be powered via a wire terminal connector or over POE into the uplink port. This allows the...

Manufacturer Part Number: EPA5060HBT The EnGenius EPA5060HBT PoE Injector delivers 60-watts of power and 2.5Gb data communication to compatible network devices up to 328 feet (100m) over CAT5e cable. Compact design with IEEE802.3bt compliance offers...

Manufacturer Part Number: EPA5060GBT The EnGenius EPA5060GBT PoE Injector delivers 60-watts of power and 1Gb data communication to compatible network devices up to 328 feet (100m) over Cat5e cable. Compact design with IEEE802.3bt compliance offers easy...